Private Label Big Brake Kit Replacement Parts


Saleen Mustang 2005+


Big Brake kits produced for the Saleen Mustang came in 2 different size configurations.

  • 4 piston with a 2 pc or 1pc 355x32mm rotor
  • 6 piston with a 2 pc 380x32mm rotor

Each caliper set is specifically made for the paired rotor size.  In other words, the 6 piston caliper from the 380mm rotor is not compatible with the 355mm rotor, and the 4 piston caliper is not compatible with the 380mm rotor.  In both instances, performance will not be optimized and single stop performance would likely result in a stopping distance longer than the factory brakes.


4 Piston Caliper and 355mm Rotor

Pad Shape D609


Description
Part Number
StopTech Performance Brake Pads
Posi-Quiet Ceramic Brake Pads
105.06090

355x32mm 1pc Aero-Rotors (min. 30mm)



These parts have been discontinued. Please refer to the section below to order 2-piece replacement rotors.

  Left Right
Slotted 30.330.1113 30.330.1114
Drilled 30.330.1213 30.330.1214

355x32mm 2pc Aero-Rotors (min. 30mm) - re-uses aluminum bell hat; inc. hardware



  Bare Iron     Zinc Plated
Left Right     Left Right
Slotted 31.737.1101.99 31.737.1102.99   Slotted 31.737.1107.99 31.737.1108.99
Drilled 31.737.1201.99 31.737.1202.99   Drilled 31.737.1207.99 31.737.1208.99

Drive Pin hardware for replacement Aero-Rotors are included.  However should you need additional hardware kits, please use the part # below.


Aero-Rotor Drive Pin Hardware kit
for 32mm rotors
89.000.0001

Bare Iron

Best for use in performance motorsports environment.  Bare iron provides the most consistency as a friction surface.

Zinc Plated Iron

Best for corrosive environments such as those where road salt is used.

6 piston Caliper and 380mm 2pc Rotor

Pad Shape D1247


Description
Part Number
StopTech Performance Brake Pads
Posi-Quiet Ceramic Brake Pads
105.12470

380x32mm 2pc Aero-Rotors (min. 30mm) - re-uses aluminum bell hat; inc. hardware


  Bare Iron     Zinc Plated
Left Right     Left Right
Slotted 31.836.1101.99 31.836.1102.99   Slotted 31.836.1107.99 31.836.1108.99
Drilled 31.836.1201.99 31.836.1202.99   Drilled 31.836.1207.99 31.836.1208.99

Saleen F-150 2007+


Big Brake kits produced for the Saleen F-150 came in 1 configuration.

  • 6 piston with a 1pc 380x32mm rotor

However there were 2 types of pads that were shipped with the big brake kits.  There is also the option of upgrading to the lighter 2pc rotors.


6 piston Caliper and 380mm 1pc Rotor

Most commonly used pad in the F-150 Saleen Big Brake Kit with 6 piston Caliper.

Pad Shape D756

 

Description
Part Number
Centric Fleet Performance Brake Pads
Posi-Quiet Extended Wear Brake Pads
106.07560

Less commonly used pad in the F-150 Saleen Big Brake Kit with 6 piston Caliper. 


Click for more info

Pad Shape D1247

 

Description
Part Number
StopTech Performance Brake Pads
Posi-Quiet Ceramic Brake Pads
105.12470



  Left Right
Slotted 30.332.1113 30.332.1114

380mm 2pc Rotor upgrade

This option was not available from Saleen

380x32mm StopTech Aero-Rotors and Hats assembled (min. 30mm)

  Bare Iron     Zinc Plated
  Pair of Left & Right Rotors     Pair of Left & Right Rotors
Slotted
81.332.8311
  Slotted
81.332.8331
Drilled
81.332.8321
  Drilled
81.332.8341


Aluminum Bell Hats 


  Left Right
Aluminum Bell Hats 37.332.8613 37.332.8614

  Bare Iron     Zinc Plated
Left Right     Left Right
Slotted 31.836.1101.99 31.836.1102.99   Slotted 31.836.1107.99 31.836.1108.99
Drilled 31.836.1201.99 31.836.1202.99   Drilled 31.836.1207.99 31.836.1208.99
Drive Pin hardware for replacement Aero-Rotors are included.  However should you need additional hardware kits, please use the part # below. 

Aero-Rotor Drive Pin Hardware kit
89.000.0015

Hub for 6 Lug - 2wd only





Hub 6-Lug
124.65902